Three Way Ball Valve with Clamped Connection with Horizontal Actuator
The series of ball valve is mainly used in industrial fields of gasoline, chemical, hydraulic, food and beverage, etc.
The ball valve can be operated by handle or by actuator automatically
The structure of the ball valve: One piece, Two pieces, Three piece and Flanged type, etc.
The Connection: Threaded, welded, clamped, flange etc.
|Product Name:||Three Way Ball Valve with Clamp End with Pnuematic Actuator|
|Valve Body Material:||SS304 or SS316L|
|Max. Working Pressure:||10Bar|
|Max. Working Temperature:||150 degree C|
|Availably size:||DN25-DN100 or 1" - 4"|
|Ball Type:||T port or L port|
|Application scope||fields of gasoline, chemical, hydraulic, food and beverage, etc.|
|Packing details||Bubble pack for each valve, carton pack, wooden pack, or customerized|
|Delivery details||Usually within 15 days after receiving T/T down payments|
Flux domination of pipeline: DN25-100&1"-4", applied to the stainless steel pipeline systemApplications
The hygienic design of the valve is widely used in the field of food processing, beverages, fruit juices, wine, biopharmaceutical and vary flexible body combinations For example, L-Port or T-Port can be interchangeable on-site Inlet, outlet to be any combination of changes can guarantee dead angle, no retention.
Pressure: 10-30bar(Depending on seal material and temperature)
Operating modes: Manual, pneumatic, electric
Surface finishing: Internal surface Ra0.6μ M, external surface
Certificate: PED/97/23/EC, 3A, FDA
Control: Process controller, valve positioning (see controller directory)
C-TOP control unit, AS-1 Device Net bus communication
Terminal connection (options), position sensor PNP. NPN(options)
All surfaces which come directly or indirectly in contact with the product are machined to 0.625 micron (25 micro inch Ra, Grit 180). Mechanical polishing to higher levels of surface finish up to 0.25 micron (10 micro inch Ra, Grit 320) are available including internal or external Electropolishing.