2" SS 304 Welding Manual Double Seat Valve with Stainless Steel HandleTechnical specifications:
Working temperature: -10ºC to 120ºC (EPDM) 14ºF 248ºF +140(SIP, max.30min) 248ºF
Max. working pressure: 10bar/145psi
Compressed air pressure: 5-7bar
Air supply connections: G1/8''(BSP)Design features:
Seal-in-one piece design.
Meet high-frequency on/off.
No dead angle designed to meet the requirements of 3A-85-00
Seal FDA 177.2600
Connection standard: clamp, weld, thread, DIN, SMS, ISO
Small volume and light weightOperating principle
Seat valves are operated automatically by s single-acting or a double-acting pneumatic actuator. By supplying compressed air, the shaft is moved to place the valve in the "open" or "closed" position.
The 180° rotation of the pneumatic cylinder to realize the interchange of normally open and normally closed.Materials:
Parts contact with the product: AISI 316L, AISI304
Other partsin stainless steel: AISI 304
Gaskets( standard): EPDM according to FDA 177.2600
Internal surface finish: Ra≤0.8μm
External surface finish :Sandblast or Mirror finishOptions:
Can be manual operated.
Gaskets: FPM (Viton(R)) in compliance with FDA 177.2600
Connections: DIN, SMS, RJT, IDF
Double-acting pneumatic actuator
External position sensor
Steam barrier (if shaft sterilization is required)
Body jacket insulation
Valve position regulator
Double stop actuator
Diaphragm type valve cavity
C-TOP control unit